Documentation

pn_vrouterbgp - CLI command to add/remove/modify vrouter-bgp.

New in version 2.2.

Synopsis

  • Execute vrouter-bgp-add, vrouter-bgp-remove, vrouter-bgp-modify command.
  • Each fabric, cluster, standalone switch, or virtual network (VNET) can provide its tenants with a vRouter service that forwards traffic between networks and implements Layer 4 protocols.

Parameters

Parameter
Choices/Defaults
Comments
pn_bfd
Specify if you want BFD protocol support for fault detection.
pn_clipassword
Provide login password if user is not root.
pn_cliswitch
Target switch(es) to run the cli on.
pn_cliusername
Provide login username if user is not root.
pn_default_originate
Specify if you want announce default routes to the neighbor or not.
pn_ebgp
Specify a value for external BGP to accept or attempt BGP connections to external peers, not directly connected, on the network. This is a value between 1 and 255.
pn_holdtime
Specify BGP neighbor holdtime in seconds.
pn_keepalive
Specify BGP neighbor keepalive interval in seconds.
pn_max_prefix
Specify the maximum number of prefixes.
pn_max_prefix_warn
Specify if you want a warning message when the maximum number of prefixes is exceeded.
pn_multiprotocol
    Choices:
  • ipv4-unicast
  • ipv6-unicast
Specify a multi-protocol for BGP.
pn_neighbor
Specify a neighbor IP address to use for BGP.
Required for vrouter-bgp-add.
pn_next_hop_self
Specify if the next-hop is the same router or not.
pn_override_capability
Specify if you want to override capability.
pn_password
Specify a password, if desired.
pn_prefix_listin
Specify the prefix list to filter traffic inbound.
pn_prefix_listout
Specify the prefix list to filter traffic outbound.
pn_remote_as
Specify the remote Autonomous System(AS) number. This value is between 1 and 4294967295.
Required for vrouter-bgp-add.
pn_route_mapin
Specify inbound route map for neighbor.
pn_route_mapout
Specify outbound route map for neighbor.
pn_route_reflector
Specify if a route reflector client is used.
pn_soft_reconfig
Specify if you want a soft reconfiguration of inbound traffic.
pn_vrouter_name
required
Specify a name for the vRouter service.
pn_weight
Specify a default weight value between 0 and 65535 for the neighbor routes.
state
required
    Choices:
  • present
  • absent
  • update
State the action to perform. Use 'present' to add bgp, 'absent' to remove bgp and 'update' to modify bgp.

Examples

- name: add vrouter-bgp
  pn_vrouterbgp:
    state: 'present'
    pn_vrouter_name: 'ansible-vrouter'
    pn_neighbor: 104.104.104.1
    pn_remote_as: 1800

- name: remove vrouter-bgp
  pn_vrouterbgp:
    state: 'absent'
    pn_name: 'ansible-vrouter'

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key
Returned
Description
changed
bool
always
Indicates whether the CLI caused changes on the target.

command
str
always
The CLI command run on the target node(s).

stderr
list
on error
The set of error responses from the vrouterbgp command.

stdout
list
always
The set of responses from the vrouterbpg command.



Status

This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.

Author

  • Pluribus Networks (@amitsi)

Hint

If you notice any issues in this documentation you can edit this document to improve it.