Ansible Vault¶

What Can Be Encrypted With Vault¶

Ansible Vault can encrypt any structured data file used by Ansible. This can include “group_vars/” or “host_vars/” inventory variables, variables loaded by “include_vars” or “vars_files”, or variable files passed on the ansible-playbook command line with -e @file.yml or -e @file.json. Role variables and defaults are also included.

Ansible tasks, handlers, and so on are also data so these can be encrypted with vault as well. To hide the names of variables that you’re using, you can encrypt the task files in their entirety.

Ansible Vault can also encrypt arbitrary files, even binary files. If a vault-encrypted file is given as the src argument to the copy, template, unarchive, script or assemble modules, the file will be placed at the destination on the target host decrypted (assuming a valid vault password is supplied when running the play).

As of version 2.3, Ansible supports encrypting single values inside a YAML file, using the !vault tag to let YAML and Ansible know it uses special processing. This feature is covered in more details below.

Creating Encrypted Files¶

To create a new encrypted data file, run the following command:

ansible-vault create foo.yml

First you will be prompted for a password. The password used with vault currently must be the same for all files you wish to use together at the same time.

After providing a password, the tool will launch whatever editor you have defined with $EDITOR, and defaults to vi (before 2.1 the default was vim). Once you are done with the editor session, the file will be saved as encrypted data.

The default cipher is AES (which is shared-secret based).

Editing Encrypted Files¶

To edit an encrypted file in place, use the ansible-vault edit command. This command will decrypt the file to a temporary file and allow you to edit the file, saving it back when done and removing the temporary file:

ansible-vault edit foo.yml

Rekeying Encrypted Files¶

Should you wish to change your password on a vault-encrypted file or files, you can do so with the rekey command:

ansible-vault rekey foo.yml bar.yml baz.yml

This command can rekey multiple data files at once and will ask for the original password and also the new password.

Encrypting Unencrypted Files¶

If you have existing files that you wish to encrypt, use the ansible-vault encrypt command. This command can operate on multiple files at once:

ansible-vault encrypt foo.yml bar.yml baz.yml

Decrypting Encrypted Files¶

If you have existing files that you no longer want to keep encrypted, you can permanently decrypt them by running the ansible-vault decrypt command. This command will save them unencrypted to the disk, so be sure you do not want ansible-vault edit instead:

ansible-vault decrypt foo.yml bar.yml baz.yml

Viewing Encrypted Files¶

If you want to view the contents of an encrypted file without editing it, you can use the ansible-vault view command:

ansible-vault view foo.yml bar.yml baz.yml

Use encrypt_string to create encrypted variables to embed in yaml¶

The ansible-vault encrypt_string command will encrypt and format a provided string into a format that can be included in ansible-playbook YAML files.

To encrypt a string provided as a cli arg:

ansible-vault encrypt_string --vault-id a_password_file 'foobar' --name 'the_secret'

Result:

the_secret: !vault |
      $ANSIBLE_VAULT;1.1;AES256
      62313365396662343061393464336163383764373764613633653634306231386433626436623361
      6134333665353966363534333632666535333761666131620a663537646436643839616531643561
      63396265333966386166373632626539326166353965363262633030333630313338646335303630
      3438626666666137650a353638643435666633633964366338633066623234616432373231333331
      6564

To use a vault-id label for ‘dev’ vault-id:

ansible-vault encrypt_string --vault-id dev@password 'foooodev' --name 'the_dev_secret'

Result:

the_dev_secret: !vault |
          $ANSIBLE_VAULT;1.2;AES256;dev
          30613233633461343837653833666333643061636561303338373661313838333565653635353162
          3263363434623733343538653462613064333634333464660a663633623939393439316636633863
          61636237636537333938306331383339353265363239643939666639386530626330633337633833
          6664656334373166630a363736393262666465663432613932613036303963343263623137386239
          6330

To encrypt a string read from stdin and name it ‘db_password’:

echo -n 'letmein' | ansible-vault encrypt_string --vault-id dev@password --stdin-name 'db_password'

Result:

Reading plaintext input from stdin. (ctrl-d to end input)
db_password: !vault |
          $ANSIBLE_VAULT;1.2;AES256;dev
          61323931353866666336306139373937316366366138656131323863373866376666353364373761
          3539633234313836346435323766306164626134376564330a373530313635343535343133316133
          36643666306434616266376434363239346433643238336464643566386135356334303736353136
          6565633133366366360a326566323363363936613664616364623437336130623133343530333739
          3039

To be prompted for a string to encrypt, encrypt it, and give it the name ‘new_user_password’:

ansible-vault encrypt_string --vault-id dev@./password --stdin-name 'new_user_password'

Output:

Reading plaintext input from stdin. (ctrl-d to end input)

User enters ‘hunter2’ and hits ctrl-d.

Result:

new_user_password: !vault |
          $ANSIBLE_VAULT;1.2;AES256;dev
          37636561366636643464376336303466613062633537323632306566653533383833366462366662
          6565353063303065303831323539656138653863353230620a653638643639333133306331336365
          62373737623337616130386137373461306535383538373162316263386165376131623631323434
          3866363862363335620a376466656164383032633338306162326639643635663936623939666238
          3161

See also Single Encrypted Variable

Vault Ids and Multiple Vault Passwords¶

Available since Ansible 2.4

A vault id is an identifier for one or more vault secrets. Since Ansible 2.4, Ansible supports multiple vault passwords. Vault ids is a way to provide a label for a particular vault password.

Vault encrypted content can specify which vault id it was encrypted with.

Prior to Ansible 2.4, only one vault password could be used at a time. Post Ansible 2.4, multiple vault passwords can be used each time Ansible runs, so any vault files or vars that needed to be decrypted all had to use the same password.

Since Ansible 2.4, vault files or vars that are encrypted with different passwords can be used at the same time.

For example, a playbook can now include a vars file encrypted with a ‘dev’ vault id and a ‘prod’ vault id.

Providing Vault Passwords¶

Since Ansible 2.4, the recommended way to provide a vault password from the cli is to use the --vault-id cli option.

For example, to use a password store in the text file /path/to/my/vault-password-file:

ansible-playbook --vault-id /path/to/my/vault-password-file site.yml

To prompt for a password:

ansible-playbook --vault-id @prompt site.yml

To get the password from a vault password executable script my-vault-password.py:

ansible-playbook --vault-id my-vault-password.py

The value for --vault-id can specify the type of vault id (prompt, a file path, etc) and a label for the vault id (‘dev’, ‘prod’, ‘cloud’, etc)

For example, to use a password file dev-password for the vault-id ‘dev’:

ansible-playbook --vault-id dev@dev-password site.yml

To prompt for the ‘dev’ vault id:

ansible-playbook --vault-id dev@prompt site.yml

Prior to Ansible 2.4

To be prompted for a vault password, use the --ask-vault-pass cli option:

ansible-playbook --ask-vault-pass site.yml

To specify a vault password in a text file ‘dev-password’, use the --vault-password-file option:

ansible-playbook --vault-password-file dev-password site.yml

There is a config option (DEFAULT_VAULT_PASSWORD_FILE) to specify a vault password file to use without requiring the --vault-password-file cli option.

ansible-playbook --vault-id dev@dev-password --vault-id prod@prompt site.yml

ansible-playbook --vault-id dev@dev-password --vault-id prod@prompt site.yml

Speeding Up Vault Operations¶

By default, Ansible uses PyCrypto to encrypt and decrypt vault files. If you have many encrypted files, decrypting them at startup may cause a perceptible delay. To speed this up, install the cryptography package:

pip install cryptography

Vault Format¶

A vault encrypted file is a UTF-8 encoded txt file.

The file format includes a new line terminated header.

For example:

$ANSIBLE_VAULT;1.1;AES256

The header contains the vault format id, the vault format version, and a cipher id, seperated by semi-colons ‘;’

The first field $ANSIBLE_VAULT is the format id. Currently $ANSIBLE_VAULT is the only valid file format id. This is used to identify files that are vault encrypted (via vault.is_encrypted_file()).

The second field (1.1) is the vault format version. All supported versions of ansible will currently default to ‘1.1’.

The ‘1.0’ format is supported for reading only (and will be converted automatically to the ‘1.1’ format on write). The format version is currently used as an exact string compare only (version numbers are not currently ‘compared’).

The third field (AES256) identifies the cipher algorithmn used to encrypt the data. Currently, the only supported cipher is ‘AES256’. [vault format 1.0 used ‘AES’, but current code always uses ‘AES256’]

Note: In the future, the header could change. Anything after the vault id and version can be considered to depend on the vault format version. This includes the cipher id, and any additional fields that could be after that.

The rest of the content of the file is the ‘vaulttext’. The vaulttext is a text armored version of the encrypted ciphertext. Each line will be 80 characters wide, except for the last line which may be shorter.

Vault Payload Format 1.1¶

The vaulttext is a concatenation of the ciphertext and a SHA256 digest with the result ‘hexlifyied’.

‘hexlify’ refers to the hexlify() method of pythons binascii module.

hexlify()’ied result of:

• hexlify()’ed string of the salt, followed by a newline (‘n’)

• hexlify()’ed string of the crypted HMAC, followed by a newline. The HMAC is:

  • a RFC2104 style HMAC
    • inputs are:
      • The AES256 encrypted ciphertext
      • A PBKDF2 key. This key, the cipher key, and the cipher iv are generated from:
        • the salt, in bytes
        • 10000 iterations
        • SHA256() algorithmn
        • the first 32 bytes are the cipher key
        • the second 32 bytes are the HMAC key
        • remaining 16 bytes are the cipher iv
  • hexlify()’ed string of the ciphertext. The ciphertext is:

  • AES256 encrypted data. The data is encrypted using:
    • AES-CTR stream cipher
    • b_pkey1
    • iv
    • a 128 bit counter block seeded from an integer iv
    • the plaintext
      • the original plaintext
      • padding up to the AES256 blocksize. (The data used for padding is based on RFC5652)