nxos_vpc - Manages global VPC configuration¶

New in version 2.2.

Synopsis
Parameters
Notes
Examples
Return Values
Status
- Support
- Author

Synopsis ¶

Manages global VPC configuration

Parameters ¶

Parameter	Choices/Defaults	Comments
auto_recovery	Choices: no yes	Enables/Disables auto recovery
delay_restore	Choices: no yes	manages delay restore command and config value in seconds
domain required		VPC domain
peer_gw	Choices: no yes	Enables/Disables peer gateway
pkl_dest		Destination (remote) IP address used for peer keepalive link
pkl_src		Source IP address used for peer keepalive link
pkl_vrf	Default: management	VRF used for peer keepalive link
provider		Deprecated Starting with Ansible 2.5 we recommend using `connection: network_cli`. This option is only required if you are using NX-API. For more information please see the NXOS Platform Options guide. A dict object containing connection details.
username		Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate either the CLI login or the nxapi authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_USERNAME` will be used instead.
ssh_keyfile		Specifies the SSH key to use to authenticate the connection to the remote device. This argument is only used for the cli transport. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_SSH_KEYFILE` will be used instead.
use_proxy (added in 2.5)	Choices: no yes ←	If `no`, the environment variables `http_proxy` and `https_proxy` will be ignored.
host required		Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
timeout (added in 2.3)	Default: 10	Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. NX-API can be slow to return on long-running commands (sh mac, sh bgp, etc).
use_ssl	Choices: no ← yes	Configures the transport to use SSL if set to true only when the `transport=nxapi`, otherwise this value is ignored.
password		Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either cli or nxapi transports. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_PASSWORD` will be used instead.
validate_certs	Choices: no yes	If `no`, SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. If the transport argument is not nxapi, this value is ignored.
port	Default: 0 (use common port)	Specifies the port to use when building the connection to the remote device. This value applies to either cli or nxapi. The port value will default to the appropriate transport common port if none is provided in the task. (cli=22, http=80, https=443).
transport required	Default: cli	Configures the transport connection to use when connecting to the remote device. The transport argument supports connectivity to the device over cli (ssh) or nxapi.
role_priority		Role priority for device. Remember lower is better.
state required	Choices: present absent	Manages desired state of the resource
system_priority		System priority device. Remember they must match between peers.

Notes ¶

Note

Tested against NXOSv 7.3.(0)D1(1) on VIRL
The feature vpc must be enabled before this module can be used
If not using management vrf, vrf must be globally on the device before using in the pkl config
Although source IP isn’t required on the command line it is required when using this module. The PKL VRF must also be configured prior to using this module.
Both pkl_src and pkl_dest are needed when changing PKL VRF.
For information on using CLI and NX-API see the NXOS Platform Options guide
For more information on using Ansible to manage network devices see the Ansible Network Guide
For more information on using Ansible to manage Cisco devices see the Cisco integration page.

Examples ¶

- name: configure a simple asn
  nxos_vpc:
    domain: 100
    role_priority: 1000
    system_priority: 2000
    pkl_dest: 192.168.100.4
    pkl_src: 10.1.100.20
    peer_gw: true
    auto_recovery: true

- name: configure
  nxos_vpc:
    domain: 100
    role_priority: 32667
    system_priority: 2000
    peer_gw: true
    pkl_src: 10.1.100.2
    pkl_dest: 192.168.100.4
    auto_recovery: true

Return Values ¶

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
commands list	always	commands sent to the device Sample: ['vpc domain 100', 'peer-keepalive destination 192.168.100.4 source 10.1.100.20 vrf management', 'auto-recovery', 'peer-gateway']

Status ¶

This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.

Support ¶

For more information about Red Hat’s support of this module, please refer to this Knowledge Base article

Author ¶

Jason Edelman (@jedelman8)
Gabriele Gerbino (@GGabriele)

Hint

If you notice any issues in this documentation you can edit this document to improve it.