Documentation

nxos_igmp_snooping - Manages IGMP snooping global configuration.

New in version 2.2.

Synopsis

  • Manages IGMP snooping global configuration.

Parameters

Parameter
Choices/Defaults
Comments
group_timeout
Group membership timeout value for all VLANs on the device. Accepted values are integer in range 1-10080, never and default.
link_local_grp_supp
    Choices:
  • no
  • yes
Global link-local groups suppression.
provider
Deprecated
Starting with Ansible 2.5 we recommend using connection: network_cli.
This option is only required if you are using NX-API.
For more information please see the NXOS Platform Options guide.
A dict object containing connection details.
 
username
Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate either the CLI login or the nxapi authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.
 
ssh_keyfile
Specifies the SSH key to use to authenticate the connection to the remote device. This argument is only used for the cli transport. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.
 
use_proxy
(added in 2.5)
    Choices:
  • no
  • yes ←
If no, the environment variables http_proxy and https_proxy will be ignored.
 
host
required
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
 
timeout
(added in 2.3)
Default:
10
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. NX-API can be slow to return on long-running commands (sh mac, sh bgp, etc).
 
use_ssl
    Choices:
  • no ←
  • yes
Configures the transport to use SSL if set to true only when the transport=nxapi, otherwise this value is ignored.
 
password
Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either cli or nxapi transports. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.
 
validate_certs
    Choices:
  • no
  • yes
If no, SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. If the transport argument is not nxapi, this value is ignored.
 
port
Default:
0 (use common port)
Specifies the port to use when building the connection to the remote device. This value applies to either cli or nxapi. The port value will default to the appropriate transport common port if none is provided in the task. (cli=22, http=80, https=443).
 
transport
required
Default:
cli
Configures the transport connection to use when connecting to the remote device. The transport argument supports connectivity to the device over cli (ssh) or nxapi.
report_supp
    Choices:
  • no
  • yes
Global IGMPv1/IGMPv2 Report Suppression.
snooping
    Choices:
  • no
  • yes
Enables/disables IGMP snooping on the switch.
state
    Choices:
  • present ←
  • default
Manage the state of the resource.
v3_report_supp
    Choices:
  • no
  • yes
Global IGMPv3 Report Suppression and Proxy Reporting.

Notes

Note

  • Tested against NXOSv 7.3.(0)D1(1) on VIRL
  • When state=default, params will be reset to a default state.
  • group_timeout also accepts never as an input.
  • For information on using CLI and NX-API see the NXOS Platform Options guide
  • For more information on using Ansible to manage network devices see the Ansible Network Guide
  • For more information on using Ansible to manage Cisco devices see the Cisco integration page.

Examples

# ensure igmp snooping params supported in this module are in there default state
- nxos_igmp_snooping:
    state: default

# ensure following igmp snooping params are in the desired state
- nxos_igmp_snooping:
   group_timeout: never
   snooping: true
   link_local_grp_supp: false
   optimize_mcast_flood: false
   report_supp: true
   v3_report_supp: true

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key
Returned
Description
commands
list
always
command sent to the device

Sample:
['ip igmp snooping link-local-groups-suppression', 'ip igmp snooping group-timeout 50', 'no ip igmp snooping report-suppression', 'no ip igmp snooping v3-report-suppression', 'no ip igmp snooping']


Status

This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.

Support

For more information about Red Hat’s support of this module, please refer to this Knowledge Base article

Author

  • Jason Edelman (@jedelman8)
  • Gabriele Gerbino (@GGabriele)

Hint

If you notice any issues in this documentation you can edit this document to improve it.