netscaler_cs_vserver - Manage content switching vserver¶

New in version 2.4.

Synopsis
- Requirements
Parameters
Notes
Examples
Return Values
Status
- Author

Synopsis ¶

Manage content switching vserver
This module is intended to run either on the ansible control node or a bastion (jumpserver) with access to the actual netscaler instance

Requirements ¶

The below requirements are needed on the host that executes this module.

nitro python sdk

Parameters ¶

Parameter	Choices/Defaults	Comments
appflowlog	Choices: enabled disabled	Enable logging appflow flow information.
authentication	Choices: no yes	Authenticate users who request a connection to the content switching virtual server.
authenticationhost		FQDN of the authentication virtual server. The service type of the virtual server should be either `HTTP` or `SSL`. Minimum length = 3 Maximum length = 252
authn401	Choices: no yes	Enable HTTP 401-response based authentication.
authnprofile		Name of the authentication profile to be used when authentication is turned on.
authnvsname		Name of authentication virtual server that authenticates the incoming user requests to this content switching virtual server. . Minimum length = 1 Maximum length = 252
backupip		. Minimum length = 1
backupvserver		Name of the backup virtual server that you are configuring. Must begin with an ASCII alphanumeric or underscore `_` character, and must contain only ASCII alphanumeric, underscore `_`, hash `#`, period `.`, space , colon `:`, at sign `@`, equal sign `=`, and hyphen `-` characters. Can be changed after the backup virtual server is created. You can assign a different backup virtual server or rename the existing virtual server. Minimum length = 1
cacheable	Choices: no yes	Use this option to specify whether a virtual server, used for load balancing or content switching, routes requests to the cache redirection virtual server before sending it to the configured servers.
casesensitive	Choices: no yes	Consider case in URLs (for policies that use URLs instead of RULES). For example, with the `on` setting, the URLs /a/1.html and /A/1.HTML are treated differently and can have different targets (set by content switching policies). With the `off` setting, /a/1.html and /A/1.HTML are switched to the same target.
clttimeout		Idle time, in seconds, after which the client connection is terminated. The default values are: Minimum value = `0` Maximum value = `31536000`
comment		Information about this virtual server.
cookiedomain		. Minimum length = 1
cookietimeout		. Minimum value = `0` Maximum value = `1440`
dbprofilename		Name of the DB profile. Minimum length = 1 Maximum length = 127
disabled	Choices: no ← yes	When set to `yes` the cs vserver will be disabled. When set to `no` the cs vserver will be enabled. Note that due to limitations of the underlying NITRO API a `disabled` state change alone does not cause the module result to report a changed status.
disableprimaryondown	Choices: enabled disabled	Continue forwarding the traffic to backup virtual server even after the primary server comes UP from the DOWN state.
dnsprofilename		Name of the DNS profile to be associated with the VServer. DNS profile properties will applied to the transactions processed by a VServer. This parameter is valid only for DNS and DNS-TCP VServers. Minimum length = 1 Maximum length = 127
domainname		Domain name for which to change the time to live (TTL) and/or backup service IP address. Minimum length = 1
downstateflush	Choices: enabled disabled	Flush all active transactions associated with a virtual server whose state transitions from UP to DOWN. Do not enable this option for applications that must complete their transactions.
httpprofilename		Name of the HTTP profile containing HTTP configuration settings for the virtual server. The service type of the virtual server should be either `HTTP` or `SSL`. Minimum length = 1 Maximum length = 127
icmpvsrresponse	Choices: PASSIVE ACTIVE	Can be active or passive.
insertvserveripport	Choices: OFF VIPADDR V6TOV4MAPPING	Insert the virtual server's VIP address and port number in the request header. Available values function as follows: `VIPADDR` - Header contains the vserver's IP address and port number without any translation. `OFF` - The virtual IP and port header insertion option is disabled. `V6TOV4MAPPING` - Header contains the mapped IPv4 address corresponding to the IPv6 address of the vserver and the port number. An IPv6 address can be mapped to a user-specified IPv4 address using the set ns ip6 command.
ipmask		IP mask, in dotted decimal notation, for the IP Pattern parameter. Can have leading or trailing non-zero octets (for example, `255.255.240.0` or `0.0.255.255`). Accordingly, the mask specifies whether the first n bits or the last n bits of the destination IP address in a client request are to be matched with the corresponding bits in the IP pattern. The former is called a forward mask. The latter is called a reverse mask.
ippattern		IP address pattern, in dotted decimal notation, for identifying packets to be accepted by the virtual server. The IP Mask parameter specifies which part of the destination IP address is matched against the pattern. Mutually exclusive with the IP Address parameter. For example, if the IP pattern assigned to the virtual server is `198.51.100.0` and the IP mask is `255.255.240.0` (a forward mask), the first 20 bits in the destination IP addresses are matched with the first 20 bits in the pattern. The virtual server accepts requests with IP addresses that range from 198.51.96.1 to 198.51.111.254. You can also use a pattern such as `0.0.2.2` and a mask such as `0.0.255.255` (a reverse mask). If a destination IP address matches more than one IP pattern, the pattern with the longest match is selected, and the associated virtual server processes the request. For example, if the virtual servers, `vs1` and `vs2`, have the same IP pattern, `0.0.100.128`, but different IP masks of `0.0.255.255` and `0.0.224.255`, a destination IP address of 198.51.100.128 has the longest match with the IP pattern of `vs1`. If a destination IP address matches two or more virtual servers to the same extent, the request is processed by the virtual server whose port number matches the port number in the request.
ipv46		IP address of the content switching virtual server. Minimum length = 1
l2conn		Use L2 Parameters to identify a connection.
lbvserver (added in 2.5)		The default Load Balancing virtual server.
listenpolicy		String specifying the listen policy for the content switching virtual server. Can be either the name of an existing expression or an in-line expression.
mssqlserverversion	Choices: 70 2000 2000SP1 2005 2008 2008R2 2012 2014	The version of the MSSQL server.
mysqlcharacterset		The character set returned by the mysql vserver.
mysqlprotocolversion		The protocol version returned by the mysql vserver.
mysqlservercapabilities		The server capabilities returned by the mysql vserver.
mysqlserverversion		The server version string returned by the mysql vserver. Minimum length = 1 Maximum length = 31
name		Name for the content switching virtual server. Must begin with an ASCII alphanumeric or underscore `_` character, and must contain only ASCII alphanumeric, underscore `_`, hash `#`, period `.`, space, colon `:`, at sign `@`, equal sign `=`, and hyphen `-` characters. Cannot be changed after the CS virtual server is created. Minimum length = 1
netprofile		The name of the network profile. Minimum length = 1 Maximum length = 127
nitro_pass required		The password with which to authenticate to the netscaler node.
nitro_protocol	Choices: http ← https	Which protocol to use when accessing the nitro API objects.
nitro_timeout	Default: 310	Time in seconds until a timeout error is thrown when establishing a new session with Netscaler
nitro_user required		The username with which to authenticate to the netscaler node.
nsip required		The ip address of the netscaler appliance where the nitro API calls will be made. The port can be specified with the colon (:). E.g. 192.168.1.1:555.
oracleserverversion	Choices: 10G 11G	Oracle server version.
port		Port number for content switching virtual server. Minimum value = 1 Range `1` - `65535` * in CLI is represented as 65535 in NITRO API
precedence	Choices: RULE URL	Type of precedence to use for both RULE-based and URL-based policies on the content switching virtual server. With the default `RULE` setting, incoming requests are evaluated against the rule-based content switching policies. If none of the rules match, the URL in the request is evaluated against the URL-based content switching policies.
push	Choices: enabled disabled	Process traffic with the push virtual server that is bound to this content switching virtual server (specified by the Push VServer parameter). The service type of the push virtual server should be either `HTTP` or `SSL`.
pushlabel		Expression for extracting the label from the response received from server. This string can be either an existing rule name or an inline expression. The service type of the virtual server should be either `HTTP` or `SSL`.
pushmulticlients	Choices: no yes	Allow multiple Web 2.0 connections from the same client to connect to the virtual server and expect updates.
pushvserver		Name of the load balancing virtual server, of type `PUSH` or `SSL_PUSH`, to which the server pushes updates received on the client-facing load balancing virtual server. Minimum length = 1
range		Number of consecutive IP addresses, starting with the address specified by the IP Address parameter, to include in a range of addresses assigned to this virtual server. Minimum value = `1` Maximum value = `254`
redirectportrewrite	Choices: enabled disabled	State of port rewrite while performing HTTP redirect.
redirecturl		URL to which traffic is redirected if the virtual server becomes unavailable. The service type of the virtual server should be either `HTTP` or `SSL`. Caution: Make sure that the domain in the URL does not match the domain specified for a content switching policy. If it does, requests are continuously redirected to the unavailable virtual server. Minimum length = 1
rhistate	Choices: PASSIVE ACTIVE	A host route is injected according to the setting on the virtual servers * If set to `PASSIVE` on all the virtual servers that share the IP address, the appliance always injects the hostroute. * If set to `ACTIVE` on all the virtual servers that share the IP address, the appliance injects even if one virtual server is UP. * If set to `ACTIVE` on some virtual servers and `PASSIVE` on the others, the appliance, injects even if one virtual server set to `ACTIVE` is UP.
rtspnat	Choices: no yes	Enable network address translation (NAT) for real-time streaming protocol (RTSP) connections.
save_config	Choices: no yes ←	If true the module will save the configuration on the netscaler node if it makes any changes. The module will not save the configuration on the netscaler node if it made no changes.
servicetype	Choices: HTTP SSL TCP FTP RTSP SSL_TCP UDP DNS SIP_UDP SIP_TCP SIP_SSL ANY RADIUS RDP MYSQL MSSQL DIAMETER SSL_DIAMETER DNS_TCP ORACLE SMPP	Protocol used by the virtual server.
sitedomainttl		. Minimum value = `1`
sobackupaction	Choices: DROP ACCEPT REDIRECT	Action to be performed if spillover is to take effect, but no backup chain to spillover is usable or exists.
somethod	Choices: CONNECTION DYNAMICCONNECTION BANDWIDTH HEALTH NONE	Type of spillover used to divert traffic to the backup virtual server when the primary virtual server reaches the spillover threshold. Connection spillover is based on the number of connections. Bandwidth spillover is based on the total Kbps of incoming and outgoing traffic.
sopersistence	Choices: enabled disabled	Maintain source-IP based persistence on primary and backup virtual servers.
sopersistencetimeout		Time-out value, in minutes, for spillover persistence. Minimum value = `2` Maximum value = `1440`
sothreshold		Depending on the spillover method, the maximum number of connections or the maximum total bandwidth (Kbps) that a virtual server can handle before spillover occurs. Minimum value = `1` Maximum value = `4294967287`
ssl_certkey (added in 2.5)		The name of the ssl certificate that is bound to this service. The ssl certificate must already exist. Creating the certificate can be done with the netscaler_ssl_certkey module. This option is only applicable only when `servicetype` is `SSL`.
state	Choices: present ← absent	The state of the resource being configured by the module on the netscaler node. When present the resource will be created if needed and configured according to the module's parameters. When absent the resource will be deleted from the netscaler node.
stateupdate	Choices: enabled disabled	Enable state updates for a specific content switching virtual server. By default, the Content Switching virtual server is always UP, regardless of the state of the Load Balancing virtual servers bound to it. This parameter interacts with the global setting as follows: Global Level \| Vserver Level \| Result enabled enabled enabled enabled disabled enabled disabled enabled enabled disabled disabled disabled If you want to enable state updates for only some content switching virtual servers, be sure to disable the state update parameter.
targettype	Choices: GSLB	Virtual server target type.
tcpprofilename		Name of the TCP profile containing TCP configuration settings for the virtual server. Minimum length = 1 Maximum length = 127
td		Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0. Minimum value = 0 Maximum value = 4094
ttl		. Minimum value = `1`
validate_certs	Default: yes	If `no`, SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates.
vipheader		Name of virtual server IP and port header, for use with the VServer IP Port Insertion parameter. Minimum length = 1

Notes ¶

Note

For more information on using Ansible to manage Citrix NetScaler Network devices see https://www.ansible.com/ansible-netscaler.

Examples ¶

# policy_1 must have been already created with the netscaler_cs_policy module
# lbvserver_1 must have been already created with the netscaler_lb_vserver module

- name: Setup content switching vserver
  delegate_to: localhost
  netscaler_cs_vserver:
    nsip: 172.18.0.2
    nitro_user: nsroot
    nitro_pass: nsroot

    state: present

    name: cs_vserver_1
    ipv46: 192.168.1.1
    port: 80
    servicetype: HTTP

    policybindings:
      - policyname: policy_1
        targetlbvserver: lbvserver_1

Return Values ¶

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
diff dict	failure	List of differences between the actual configured object and the configuration specified in the module Sample: {'clttimeout': 'difference. ours: (float) 100.0 other: (float) 60.0'}
loglines list	always	list of logged messages by the module Sample: ['message 1', 'message 2']
msg str	failure	Message detailing the failure reason Sample: Action does not exist

Status ¶

This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.

Author ¶

George Nikolopoulos (@giorgos-nikolopoulos)

Hint

If you notice any issues in this documentation you can edit this document to improve it.