New in version 2.4.
Parameter |
Choices/Defaults |
Comments |
|---|---|---|
|
admin_distance
|
|
Admin distance of the static route.
|
|
aggregate
|
|
List of static route definitions
|
|
mask
required |
|
Network prefix mask of the static route.
|
|
next_hop
required |
|
Next hop IP of the static route.
|
|
prefix
required |
|
Network prefix of the static route.
|
|
purge
|
Default:
no
|
Purge static routes not defined in the aggregate parameter.
|
|
state
|
|
State of the static route configuration.
|
- name: configure static route
net_static_route:
prefix: 192.168.2.0
mask: 255.255.255.0
next_hop: 10.0.0.1
- name: remove configuration
net_static_route:
prefix: 192.168.2.0
mask: 255.255.255.0
next_hop: 10.0.0.1
state: absent
- name: configure aggregates of static routes
net_static_route:
aggregate:
- { prefix: 192.168.2.0, mask 255.255.255.0, next_hop: 10.0.0.1 }
- { prefix: 192.168.3.0, mask 255.255.255.0, next_hop: 10.0.2.1 }
- name: Remove static route collections
net_static_route:
aggregate:
- { prefix: 172.24.1.0/24, next_hop: 192.168.42.64 }
- { prefix: 172.24.3.0/24, next_hop: 192.168.42.64 }
state: absent
Common return values are documented here, the following are the fields unique to this module:
Key |
Returned |
Description |
|---|---|---|
|
commands
list
|
always |
The list of configuration mode commands to send to the device
Sample:
['ip route 192.168.2.0/24 10.0.0.1']
|
This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.
For more information about Red Hat’s support of this module, please refer to this Knowledge Base article
Hint
If you notice any issues in this documentation you can edit this document to improve it.