New in version 2.1.
The below requirements are needed on the host that executes this module.
Parameter |
Choices/Defaults |
Comments |
|---|---|---|
|
commands
|
|
The commands to send to the remote junos device over the configured provider. The resulting output from the command is returned. If the wait_for argument is provided, the module is not returned until the condition is satisfied or the number of retries has been exceeded.
|
|
display
(added in 2.3) |
depends on input argument I(rpcs) or I(commands)
|
Encoding scheme to use when serializing output from the device. This handles how to properly understand the output and apply the conditionals path to the result set. For rpcs argument default display is
xml and for commands argument default display is text. Value set is applicable only for fetching configuration from device.aliases: format, output |
|
interval
|
Default:
yes
|
Configures the interval in seconds to wait between retries of the command. If the command does not pass the specified conditional, the interval indicates how to long to wait before trying the command again.
|
|
match
(added in 2.2) |
|
The match argument is used in conjunction with the wait_for argument to specify the match policy. Valid values are
all or any. If the value is set to all then all conditionals in the wait_for must be satisfied. If the value is set to any then only one of the values must be satisfied. |
|
provider
|
|
Deprecated
Starting with Ansible 2.5 we recommend using
connection: network_cli or connection: netconf.For more information please see the Junos OS Platform Options guide.
A dict object containing connection details.
|
|
username
|
|
Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable
ANSIBLE_NET_USERNAME will be used instead. |
|
host
required |
|
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
|
|
ssh_keyfile
|
|
Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable
ANSIBLE_NET_SSH_KEYFILE will be used instead. |
|
timeout
|
Default:
10
|
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
|
|
password
|
|
Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable
ANSIBLE_NET_PASSWORD will be used instead. |
|
port
|
Default:
22
|
Specifies the port to use when building the connection to the remote device. The port value will default to the well known SSH port of 22 (for
transport=cli) or port 830 (for transport=netconf) device. |
|
retries
|
Default:
10
|
Specifies the number of retries a command should be tried before it is considered failed. The command is run on the target device every retry and evaluated against the wait_for conditionals.
|
|
rpcs
(added in 2.3) |
|
The
rpcs argument accepts a list of RPCs to be executed over a netconf session and the results from the RPC execution is return to the playbook via the modules results dictionary. |
|
wait_for
(added in 2.2) |
|
Specifies what to evaluate from the output of the command and what conditionals to apply. This argument will cause the task to wait for a particular conditional to be true before moving forward. If the conditional is not true by the configured retries, the task fails. See examples.
aliases: waitfor |
Note
- name: run show version on remote devices
junos_command:
commands: show version
- name: run show version and check to see if output contains Juniper
junos_command:
commands: show version
wait_for: result[0] contains Juniper
- name: run multiple commands on remote nodes
junos_command:
commands:
- show version
- show interfaces
- name: run multiple commands and evaluate the output
junos_command:
commands:
- show version
- show interfaces
wait_for:
- result[0] contains Juniper
- result[1] contains Loopback0
- name: run commands and specify the output format
junos_command:
commands: show version
display: json
- name: run rpc on the remote device
junos_command:
commands: show configuration
display: set
- name: run rpc on the remote device
junos_command:
rpcs: get-software-information
Common return values are documented here, the following are the fields unique to this module:
Key |
Returned |
Description |
|---|---|---|
|
failed_conditions
list
|
failed |
The list of conditionals that have failed
Sample:
['...', '...']
|
|
output
list
|
If the display is in xml format. |
The set of transformed xml to json format from the commands responses
Sample:
['...', '...']
|
|
stdout
list
|
always apart from low level errors (such as action plugin) |
The set of responses from the commands
Sample:
['...', '...']
|
|
stdout_lines
list
|
always apart from low level errors (such as action plugin) |
The value of stdout split into a list
Sample:
[['...', '...'], ['...'], ['...']]
|
This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.
For more information about Red Hat’s support of this module, please refer to this Knowledge Base article
Hint
If you notice any issues in this documentation you can edit this document to improve it.