ios_vlan - Manage VLANs on IOS network devices¶

New in version 2.5.

Synopsis
Parameters
Notes
Examples
Return Values
Status
- Support
- Author

Synopsis ¶

This module provides declarative management of VLANs on Cisco IOS network devices.

Parameters ¶

Parameter	Choices/Defaults	Comments
aggregate		List of VLANs definitions.
associated_interfaces (added in 2.5)		This is a intent option and checks the operational state of the for given vlan `name` for associated interfaces. If the value in the `associated_interfaces` does not match with the operational state of vlan interfaces on device it will result in failure.
auth_pass		Deprecated Starting with Ansible 2.5 we recommend using `connection: network_cli` and `become: yes` with `become_pass`. For more information please see the IOS Platform Options guide. Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_AUTH_PASS` will be used instead.
authorize	Choices: no ← yes	Deprecated Starting with Ansible 2.5 we recommend using `connection: network_cli` and `become: yes`. For more information please see the IOS Platform Options guide. Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_AUTHORIZE` will be used instead.
delay	Default: 10	Delay the play should wait to check for declarative intent params values.
interfaces required		List of interfaces that should be associated to the VLAN.
name		Name of the VLAN.
provider		Deprecated Starting with Ansible 2.5 we recommend using `connection: network_cli`. For more information please see the IOS Platform Options guide. A dict object containing connection details.
username		Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_USERNAME` will be used instead.
authorize	Choices: no ← yes	Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_AUTHORIZE` will be used instead.
ssh_keyfile		Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_SSH_KEYFILE` will be used instead.
auth_pass		Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_AUTH_PASS` will be used instead.
host required		Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
timeout	Default: 10	Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
password		Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_PASSWORD` will be used instead.
port	Default: 22	Specifies the port to use when building the connection to the remote device.
purge	Default: no	Purge VLANs not defined in the aggregate parameter.
state	Choices: present ← absent active suspend	State of the VLAN configuration.
vlan_id required		ID of the VLAN. Range 1-4094.

Notes ¶

Note

Tested against IOS 15.2
For more information on using Ansible to manage network devices see the Ansible Network Guide
For more information on using Ansible to manage Cisco devices see the Cisco integration page.

Examples ¶

- name: Create vlan
  ios_vlan:
    vlan_id: 100
    name: test-vlan
    state: present

- name: Add interfaces to VLAN
  ios_vlan:
    vlan_id: 100
    interfaces:
      - GigabitEthernet0/0
      - GigabitEthernet0/1

- name: Check if interfaces is assigned to VLAN
  ios_vlan:
    vlan_id: 100
    associated_interfaces:
      - GigabitEthernet0/0
      - GigabitEthernet0/1

- name: Delete vlan
  ios_vlan:
    vlan_id: 100
    state: absent

Return Values ¶

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
commands list	always	The list of configuration mode commands to send to the device Sample: ['vlan 100', 'name test-vlan']

Status ¶

This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.

Support ¶

For more information about Red Hat’s support of this module, please refer to this Knowledge Base article

Author ¶

Trishna Guha (@trishnaguha)

Hint

If you notice any issues in this documentation you can edit this document to improve it.