Documentation

cnos_vlan - Manage VLAN resources and attributes on devices running Lenovo CNOS

New in version 2.3.

Synopsis

  • This module allows you to work with VLAN related configurations. The operators used are overloaded to ensure control over switch VLAN configurations. The first level of VLAN configuration allows to set up the VLAN range, the VLAN tag persistence, a VLAN access map and access map filter. After passing this level, there are five VLAN arguments that will perform further configurations. They are vlanArg1, vlanArg2, vlanArg3, vlanArg4, and vlanArg5. The value of vlanArg1 will determine the way following arguments will be evaluated. For more details on how to use these arguments, see [Overloaded Variables]. This module uses SSH to manage network device configuration. The results of the operation will be placed in a directory named ‘results’ that must be created by the user in their local directory to where the playbook is run. For more information about this module from Lenovo and customizing it usage for your use cases, please visit http://systemx.lenovofiles.com/help/index.jsp?topic=%2Fcom.lenovo.switchmgt.ansible.doc%2Fcnos_vlan.html

Parameters

Parameter
Choices/Defaults
Comments
deviceType
required

(added in 2.3)
    Choices:
  • g8272_cnos
  • g8296_cnos
  • g8332_cnos
  • NE1072T
  • NE1032
  • NE1032T
  • NE10032
  • NE2572
This specifies the type of device where the method is executed. The choices NE1072T,NE1032,NE1032T,NE10032, NE2572 are added since version 2.4
enablePassword
(added in 2.3)
Configures the password used to enter Global Configuration command mode on the switch. If the switch does not request this password, the parameter is ignored.While generally the value should come from the inventory file, you can also specify it as a variable. This parameter is optional. If it is not specified, no default value will be used.
host
required

(added in 2.3)
This is the variable used to search the hosts file at /etc/ansible/hosts and identify the IP address of the device on which the template is going to be applied. Usually the Ansible keyword {{ inventory_hostname }} is specified in the playbook as an abstraction of the group of network elements that need to be configured.
outputfile
required

(added in 2.3)
This specifies the file path where the output of each command execution is saved. Each command that is specified in the merged template file and each response from the device are saved here. Usually the location is the results folder, but you can choose another location based on your write permission.
password
required

(added in 2.3)
Configures the password used to authenticate the connection to the remote device. The value of the password parameter is used to authenticate the SSH session. While generally the value should come from the inventory file, you can also specify it as a variable. This parameter is optional. If it is not specified, no default value will be used.
username
required

(added in 2.3)
Configures the username used to authenticate the connection to the remote device. The value of the username parameter is used to authenticate the SSH session. While generally the value should come from the inventory file, you can also specify it as a variable. This parameter is optional. If it is not specified, no default value will be used.
vlanArg1
required
    Choices:
  • access-map
  • dot1q
  • filter
  • <1-3999> VLAN ID 1-3999 or range
This is an overloaded vlan first argument. Usage of this argument can be found is the User Guide referenced above.
vlanArg2
    Choices:
  • VLAN Access Map name
  • egress-only
  • name
  • flood
  • state
  • ip
This is an overloaded vlan second argument. Usage of this argument can be found is the User Guide referenced above.
vlanArg3
    Choices:
  • action
  • match
  • statistics
  • enter VLAN id or range of vlan
  • ascii name for the VLAN
  • ipv4 or ipv6
  • active or suspend
  • fast-leave
  • last-member-query-interval
  • mrouter
  • querier
  • querier-timeout
  • query-interval
  • query-max-response-time
  • report-suppression
  • robustness-variable
  • startup-query-count
  • startup-query-interval
  • static-group
This is an overloaded vlan third argument. Usage of this argument can be found is the User Guide referenced above.
vlanArg4
    Choices:
  • drop or forward or redirect
  • ip or mac
  • Interval in seconds
  • ethernet
  • port-aggregation
  • Querier IP address
  • Querier Timeout in seconds
  • Query Interval in seconds
  • Query Max Response Time in seconds
  • Robustness Variable value
  • Number of queries sent at startup
  • Query Interval at startup
This is an overloaded vlan fourth argument. Usage of this argument can be found is the User Guide referenced above.
vlanArg5
    Choices:
  • access-list name
  • Slot/chassis number
  • Port Aggregation Number
This is an overloaded vlan fifth argument. Usage of this argument can be found is the User Guide referenced above.

Notes

Note

Examples

Tasks: The following are examples of using the module cnos_vlan. These are written in the main.yml file of the tasks directory.
---
- name: Test Vlan - Create a vlan, name it
  cnos_vlan:
      host: "{{ inventory_hostname }}"
      username: "{{ hostvars[inventory_hostname]['username'] }}"
      password: "{{ hostvars[inventory_hostname]['password'] }}"
      deviceType: "{{ hostvars[inventory_hostname]['deviceType'] }}"
      enablePassword: "{{ hostvars[inventory_hostname]['enablePassword'] }}"
      outputfile: "./results/test_vlan_{{ inventory_hostname }}_output.txt"
      vlanArg1: 13
      vlanArg2: "name"
      vlanArg3: "Anil"

- name: Test Vlan - Create a vlan, Flood configuration
  cnos_vlan:
      host: "{{ inventory_hostname }}"
      username: "{{ hostvars[inventory_hostname]['username'] }}"
      password: "{{ hostvars[inventory_hostname]['password'] }}"
      deviceType: "{{ hostvars[inventory_hostname]['deviceType'] }}"
      enablePassword: "{{ hostvars[inventory_hostname]['enablePassword'] }}"
      outputfile: "./results/test_vlan_{{ inventory_hostname }}_output.txt"
      vlanArg1: 13
      vlanArg2: "flood"
      vlanArg3: "ipv4"

- name: Test Vlan - Create a vlan, State configuration
  cnos_vlan:
      host: "{{ inventory_hostname }}"
      username: "{{ hostvars[inventory_hostname]['username'] }}"
      password: "{{ hostvars[inventory_hostname]['password'] }}"
      deviceType: "{{ hostvars[inventory_hostname]['deviceType'] }}"
      enablePassword: "{{ hostvars[inventory_hostname]['enablePassword'] }}"
      outputfile: "./results/test_vlan_{{ inventory_hostname }}_output.txt"
      vlanArg1: 13
      vlanArg2: "state"
      vlanArg3: "active"

- name: Test Vlan - VLAN Access map1
  cnos_vlan:
      host: "{{ inventory_hostname }}"
      username: "{{ hostvars[inventory_hostname]['username'] }}"
      password: "{{ hostvars[inventory_hostname]['password'] }}"
      deviceType: "{{ hostvars[inventory_hostname]['deviceType'] }}"
      enablePassword: "{{ hostvars[inventory_hostname]['enablePassword'] }}"
      outputfile: "./results/test_vlan_{{ inventory_hostname }}_output.txt"
      vlanArg1: "access-map"
      vlanArg2: "Anil"
      vlanArg3: "statistics"

- name: Test Vlan - VLAN Accep Map2
  cnos_vlan:
      host: "{{ inventory_hostname }}"
      username: "{{ hostvars[inventory_hostname]['username'] }}"
      password: "{{ hostvars[inventory_hostname]['password'] }}"
      deviceType: "{{ hostvars[inventory_hostname]['deviceType'] }}"
      enablePassword: "{{ hostvars[inventory_hostname]['enablePassword'] }}"
      outputfile: "./results/test_vlan_{{ inventory_hostname }}_output.txt"
      vlanArg1: "access-map"
      vlanArg2: "Anil"
      vlanArg3: "action"
      vlanArg4: "forward"

- name: Test Vlan - ip igmp snooping query interval
  cnos_vlan:
      host: "{{ inventory_hostname }}"
      username: "{{ hostvars[inventory_hostname]['username'] }}"
      password: "{{ hostvars[inventory_hostname]['password'] }}"
      deviceType: "{{ hostvars[inventory_hostname]['deviceType'] }}"
      enablePassword: "{{ hostvars[inventory_hostname]['enablePassword'] }}"
      outputfile: "./results/test_vlan_{{ inventory_hostname }}_output.txt"
      vlanArg1: 13
      vlanArg2: "ip"
      vlanArg3: "query-interval"
      vlanArg4: 1313

- name: Test Vlan - ip igmp snooping mrouter interface port-aggregation 23
  cnos_vlan:
      host: "{{ inventory_hostname }}"
      username: "{{ hostvars[inventory_hostname]['username'] }}"
      password: "{{ hostvars[inventory_hostname]['password'] }}"
      deviceType: "{{ hostvars[inventory_hostname]['deviceType'] }}"
      enablePassword: "{{ hostvars[inventory_hostname]['enablePassword'] }}"
      outputfile: "./results/test_vlan_{{ inventory_hostname }}_output.txt"
      vlanArg1: 13
      vlanArg2: "ip"
      vlanArg3: "mrouter"
      vlanArg4: "port-aggregation"
      vlanArg5: 23

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key
Returned
Description
msg
string
always
Success or failure message

Sample:
VLAN configuration is accomplished


Status

This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.

Author

  • Dave Kasberg (@dkasberg)

Hint

If you notice any issues in this documentation you can edit this document to improve it.