New in version 2.4.
Parameter |
Choices/Defaults |
Comments |
|---|---|---|
|
arp_direct_route
|
|
Enable VLINK direct route on VBDIF interface.
|
|
arp_distribute_gateway
|
|
Enable the distributed gateway function on VBDIF interface.
|
|
dfs_all_active
|
|
Creates all-active gateways.
|
|
dfs_id
|
|
Specifies the ID of a DFS group. The value must be 1.
|
|
dfs_peer_ip
|
|
Configure the IP address of an all-active gateway peer. The value is in dotted decimal notation.
|
|
dfs_peer_vpn
|
|
Specifies the name of the VPN instance that is associated with all-active gateway peer. The value is a string of 1 to 31 case-sensitive characters, spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string. The value
_public_ is reserved and cannot be used as the VPN instance name. |
|
dfs_source_ip
|
|
Specifies the IPv4 address bound to a DFS group. The value is in dotted decimal notation.
|
|
dfs_source_vpn
|
|
Specifies the name of a VPN instance bound to a DFS group. The value is a string of 1 to 31 case-sensitive characters without spaces. If the character string is quoted by double quotation marks, the character string can contain spaces. The value
_public_ is reserved and cannot be used as the VPN instance name. |
|
dfs_udp_port
|
|
Specifies the UDP port number of the DFS group. The value is an integer that ranges from 1025 to 65535.
|
|
state
|
|
Determines whether the config should be present or not on the device.
|
|
vbdif_bind_vpn
|
|
Specifies the name of the VPN instance that is associated with the interface. The value is a string of 1 to 31 case-sensitive characters, spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string. The value
_public_ is reserved and cannot be used as the VPN instance name. |
|
vbdif_mac
|
|
Specifies a MAC address for a VBDIF interface. The value is in the format of H-H-H. Each H is a 4-digit hexadecimal number, such as
00e0 or fc01. If an H contains less than four digits, 0s are added ahead. For example, e0 is equal to 00e0. A MAC address cannot be all 0s or 1s or a multicast MAC address. |
|
vbdif_name
|
|
Full name of VBDIF interface, i.e. Vbdif100.
|
|
vpn_instance
|
|
Specifies the name of a VPN instance. The value is a string of 1 to 31 case-sensitive characters, spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string. The value
_public_ is reserved and cannot be used as the VPN instance name. |
|
vpn_vni
|
|
Specifies a VNI ID. Binds a VXLAN network identifier (VNI) to a virtual private network (VPN) instance. The value is an integer ranging from 1 to 16000000.
|
Note
- name: vxlan gateway module test
hosts: ce128
connection: local
gather_facts: no
vars:
cli:
host: "{{ inventory_hostname }}"
port: "{{ ansible_ssh_port }}"
username: "{{ username }}"
password: "{{ password }}"
transport: cli
tasks:
- name: Configuring Centralized All-Active Gateways for the VXLAN Network
ce_vxlan_gateway:
dfs_id: 1
dfs_source_ip: 6.6.6.6
dfs_all_active: enable
dfs_peer_ip: 7.7.7.7
provider: "{{ cli }}"
- name: Bind the VPN instance to a Layer 3 gateway, enable distributed gateway, and configure host route advertisement.
ce_vxlan_gateway:
vbdif_name: Vbdif100
vbdif_bind_vpn: vpn1
arp_distribute_gateway: enable
arp_direct_route: enable
provider: "{{ cli }}"
- name: Assign a VNI to a VPN instance.
ce_vxlan_gateway:
vpn_instance: vpn1
vpn_vni: 100
provider: "{{ cli }}"
Common return values are documented here, the following are the fields unique to this module:
Key |
Returned |
Description |
|---|---|---|
|
changed
boolean
|
always |
check to see if a change was made on the device
Sample:
True
|
|
end_state
dict
|
verbose mode |
k/v pairs of configuration after module execution
Sample:
{'evn_source_ip': '6.6.6.6', 'dfs_id': '1', 'evn_source_vpn': None, 'dfs_all_active': 'enable', 'evn_peers': [{'ip': '7.7.7.7', 'vpn': ''}]}
|
|
existing
dict
|
verbose mode |
k/v pairs of existing configuration
Sample:
{'dfs_source_ip': None, 'dfs_id': '1', 'evn_peer_ip': [], 'dfs_all_active': 'disable'}
|
|
proposed
dict
|
verbose mode |
k/v pairs of parameters passed into module
Sample:
{'dfs_source_ip': '6.6.6.6', 'dfs_id': '1', 'dfs_peer_ip': '7.7.7.7', 'dfs_all_active': 'enable'}
|
|
updates
list
|
always |
commands sent to the device
Sample:
['dfs-group 1', 'source ip 6.6.6.6', 'active-active-gateway', 'peer 7.7.7.7']
|
This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.
Hint
If you notice any issues in this documentation you can edit this document to improve it.