New in version 2.4.
Parameter |
Choices/Defaults |
Comments |
|---|---|---|
|
arp_collect_host
|
|
Enables EVN BGP or BGP EVPN to collect host information.
|
|
arp_suppress
|
|
Enables ARP broadcast suppression in a BD.
|
|
bridge_domain_id
|
|
Specifies a BD(bridge domain) ID. The value is an integer ranging from 1 to 16777215.
|
|
evn_bgp
|
|
Enables EVN BGP.
|
|
evn_peer_ip
|
|
Specifies the IP address of an EVN BGP peer. The value is in dotted decimal notation.
|
|
evn_reflect_client
|
|
Configures the local device as the route reflector (RR) and its peer as the client.
|
|
evn_server
|
|
Configures the local device as the router reflector (RR) on the EVN network.
|
|
evn_source_ip
|
|
Specifies the source address of an EVN BGP peer. The value is in dotted decimal notation.
|
|
host_collect_protocol
|
|
Enables EVN BGP or BGP EVPN to advertise host information.
|
|
state
|
|
Determines whether the config should be present or not on the device.
|
|
vbdif_name
|
|
Full name of VBDIF interface, i.e. Vbdif100.
|
- name: vxlan arp module test
hosts: ce128
connection: local
gather_facts: no
vars:
cli:
host: "{{ inventory_hostname }}"
port: "{{ ansible_ssh_port }}"
username: "{{ username }}"
password: "{{ password }}"
transport: cli
tasks:
- name: Configure EVN BGP on Layer 2 and Layer 3 VXLAN gateways to establish EVN BGP peer relationships.
ce_vxlan_arp:
evn_bgp: enable
evn_source_ip: 6.6.6.6
evn_peer_ip: 7.7.7.7
provider: "{{ cli }}"
- name: Configure a Layer 3 VXLAN gateway as a BGP RR.
ce_vxlan_arp:
evn_bgp: enable
evn_server: enable
provider: "{{ cli }}"
- name: Enable EVN BGP on a Layer 3 VXLAN gateway to collect host information.
ce_vxlan_arp:
vbdif_name: Vbdif100
arp_collect_host: enable
provider: "{{ cli }}"
- name: Enable Layer 2 and Layer 3 VXLAN gateways to use EVN BGP to advertise host information.
ce_vxlan_arp:
host_collect_protocol: bgp
provider: "{{ cli }}"
- name: Enable ARP broadcast suppression on a Layer 2 VXLAN gateway.
ce_vxlan_arp:
bridge_domain_id: 100
arp_suppress: enable
provider: "{{ cli }}"
Common return values are documented here, the following are the fields unique to this module:
Key |
Returned |
Description |
|---|---|---|
|
changed
boolean
|
always |
check to see if a change was made on the device
Sample:
True
|
|
end_state
dict
|
verbose mode |
k/v pairs of configuration after module execution
Sample:
{'evn_source_ip': '6.6.6.6', 'evn_peer_ip': ['7.7.7.7'], 'evn_bgp': 'enable'}
|
|
existing
dict
|
verbose mode |
k/v pairs of existing configuration
Sample:
{'evn_source_ip': None, 'evn_peer_ip': [], 'evn_bgp': 'disable'}
|
|
proposed
dict
|
verbose mode |
k/v pairs of parameters passed into module
Sample:
{'evn_source_ip': '6.6.6.6', 'state': 'present', 'evn_peer_ip': '7.7.7.7', 'evn_bgp': 'enable'}
|
|
updates
list
|
always |
commands sent to the device
Sample:
['evn bgp', 'source-address 6.6.6.6', 'peer 7.7.7.7']
|
This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.
Hint
If you notice any issues in this documentation you can edit this document to improve it.