New in version 2.4.
Parameter |
Choices/Defaults |
Comments |
|---|---|---|
|
channel_cfg_name
|
Default:
console
|
Channel name.The value is a string of 1 to 30 case-sensitive characters. The default value is console.
|
|
channel_id
|
|
Number for channel. The value is an integer ranging from 0 to 9. The default value is 0.
|
|
channel_name
|
|
Channel name. The value is a string of 1 to 30 case-sensitive characters.
|
|
channel_out_direct
|
|
Direction of information output.
|
|
facility
|
|
Log record tool.
|
|
filter_feature_name
|
|
Feature name of the filtered log. The value is a string of 1 to 31 case-insensitive characters.
|
|
filter_log_name
|
|
Name of the filtered log. The value is a string of 1 to 63 case-sensitive characters.
|
|
info_center_enable
|
|
Whether the info-center function is enabled. The value is of the Boolean type.
|
|
ip_type
|
|
Log server address type, IPv4 or IPv6.
|
|
is_default_vpn
|
|
Use the default VPN or not.
|
|
level
|
|
Level of logs saved on a log server.
|
|
logfile_max_num
|
|
Maximum number of log files of the same type. The default value is 200.
The value range for log files is[3, 500], for security files is [1, 3],and for operation files is [1, 7].
|
|
logfile_max_size
|
32
|
Maximum size (in MB) of a log file. The default value is 32.
The value range for log files is [4, 8, 16, 32], for security files is [1, 4],
and for operation files is [1, 4].
|
|
packet_priority
|
|
Set the priority of the syslog packet.The value is an integer ranging from 0 to 7. The default value is 0.
|
|
server_domain
|
|
Server name. The value is a string of 1 to 255 case-sensitive characters.
|
|
server_ip
|
|
Log server address, IPv4 or IPv6 type. The value is a string of 0 to 255 characters. The value can be an valid IPv4 or IPv6 address.
|
|
server_port
|
|
Number of a port sending logs.The value is an integer ranging from 1 to 65535. For UDP, the default value is 514. For TCP, the default value is 601. For TSL, the default value is 6514.
|
|
source_ip
|
|
Log source ip address, IPv4 or IPv6 type. The value is a string of 0 to 255. The value can be an valid IPv4 or IPv6 address.
|
|
ssl_policy_name
|
|
SSL policy name. The value is a string of 1 to 23 case-sensitive characters.
|
|
state
|
|
Specify desired state of the resource.
|
|
suppress_enable
|
|
Whether a device is enabled to suppress duplicate statistics. The value is of the Boolean type.
|
|
timestamp
|
|
Log server timestamp. The value is of the enumerated type and case-sensitive.
|
|
transport_mode
|
|
Transport mode. The value is of the enumerated type and case-sensitive.
|
|
vrf_name
|
|
VPN name on a log server. The value is a string of 1 to 31 case-sensitive characters. The default value is _public_.
|
- name: info center global module test
hosts: cloudengine
connection: local
gather_facts: no
vars:
cli:
host: "{{ inventory_hostname }}"
port: "{{ ansible_ssh_port }}"
username: "{{ username }}"
password: "{{ password }}"
transport: cli
tasks:
- name: Config info-center enable
ce_info_center_global:
info_center_enable: true
state: present
provider: "{{ cli }}"
- name: Config statistic-suppress enable
ce_info_center_global:
suppress_enable: true
state: present
provider: "{{ cli }}"
- name: Config info-center syslog packet-priority 1
ce_info_center_global:
packet_priority: 2
state: present
provider: "{{ cli }}"
- name: Config info-center channel 1 name aaa
ce_info_center_global:
channel_id: 1
channel_cfg_name: aaa
state: present
provider: "{{ cli }}"
- name: Config info-center logfile size 10
ce_info_center_global:
logfile_max_num: 10
state: present
provider: "{{ cli }}"
- name: Config info-center console channel 1
ce_info_center_global:
channel_out_direct: console
channel_id: 1
state: present
provider: "{{ cli }}"
- name: Config info-center filter-id bymodule-alias snmp snmp_ipunlock
ce_info_center_global:
filter_feature_name: SNMP
filter_log_name: SNMP_IPLOCK
state: present
provider: "{{ cli }}"
- name: Config info-center max-logfile-number 16
ce_info_center_global:
logfile_max_size: 16
state: present
provider: "{{ cli }}"
- name: Config syslog loghost domain.
ce_info_center_global:
server_domain: aaa
vrf_name: aaa
channel_id: 1
transport_mode: tcp
facility: local4
server_port: 100
level: alert
timestamp: UTC
state: present
provider: "{{ cli }}"
Common return values are documented here, the following are the fields unique to this module:
Key |
Returned |
Description |
|---|---|---|
|
changed
boolean
|
always |
check to see if a change was made on the device
Sample:
True
|
|
end_state
dict
|
always |
k/v pairs of aaa params after module execution
Sample:
{'server_domain_info': [{'vrfName': '_public_', 'chnlName': 'monitor', 'level': 'alert', 'serverDomain': 'aaa', 'transportMode': 'tcp', 'facility': 'local4', 'isBriefFmt': 'false', 'sslPolicyName': None, 'serverPort': '100', 'timestamp': 'localtime', 'isDefaultVpn': 'true', 'chnlId': '1', 'sourceIP': '0.0.0.0'}, {'vrfName': 'aaa', 'chnlName': 'monitor', 'level': 'alert', 'serverDomain': 'aaa', 'transportMode': 'tcp', 'facility': 'local4', 'isBriefFmt': 'false', 'sslPolicyName': 'gmc', 'serverPort': '100', 'timestamp': 'UTC', 'isDefaultVpn': 'false', 'chnlId': '1', 'sourceIP': '0.0.0.0'}]}
|
|
existing
dict
|
always |
k/v pairs of existing rollback
Sample:
{'server_domain_info': [{'vrfName': 'aaa', 'chnlName': 'monitor', 'level': 'alert', 'serverDomain': 'aaa', 'transportMode': 'tcp', 'facility': 'local4', 'isBriefFmt': 'false', 'sslPolicyName': 'gmc', 'serverPort': '100', 'timestamp': 'UTC', 'isDefaultVpn': 'false', 'chnlId': '1', 'sourceIP': '0.0.0.0'}]}
|
|
proposed
dict
|
always |
k/v pairs of parameters passed into module
Sample:
{'server_domain': 'aaa', 'level': 'alert', 'timestamp': 'localtime', 'facility': 'local4', 'channel_id': '1', 'state': 'present', 'server_port': '100', 'transport_mode': 'tcp', 'is_default_vpn': True}
|
|
updates
list
|
always |
command sent to the device
Sample:
['info-center loghost domain aaa level alert port 100 facility local4 channel 1 localtime transport tcp']
|
This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.
Hint
If you notice any issues in this documentation you can edit this document to improve it.