Documentation

bigip_gtm_datacenter - Manage Datacenter configuration in BIG-IP

New in version 2.2.

Synopsis

  • Manage BIG-IP data center configuration. A data center defines the location where the physical network components reside, such as the server and link objects that share the same subnet on the network. This module is able to manipulate the data center definitions in a BIG-IP.

Requirements

The below requirements are needed on the host that executes this module.

  • f5-sdk >= 3.0.9

Parameters

Parameter
Choices/Defaults
Comments
contact
The name of the contact for the data center.
description
The description of the data center.
location
The location of the data center.
name
required
The name of the data center.
partition
(added in 2.5)
Default:
Common
Device partition to manage resources on.
password
required
The password for the user account used to connect to the BIG-IP. You can omit this option if the environment variable F5_PASSWORD is set.

aliases: pass, pwd
provider
(added in 2.5)
A dict object containing connection details.
 
ssh_keyfile
Specifies the SSH keyfile to use to authenticate the connection to the remote device. This argument is only used for cli transports. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.
 
timeout
Default:
10
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
 
server
required
The BIG-IP host. You can omit this option if the environment variable F5_SERVER is set.
 
user
required
The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You can omit this option if the environment variable F5_USER is set.
 
server_port
Default:
443
The BIG-IP server port. You can omit this option if the environment variable F5_SERVER_PORT is set.
 
password
required
The password for the user account used to connect to the BIG-IP. You can omit this option if the environment variable F5_PASSWORD is set.

aliases: pass, pwd
 
validate_certs
    Choices:
  • no
  • yes ←
If no, SSL certificates will not be validated. Use this only on personally controlled sites using self-signed certificates. You can omit this option if the environment variable F5_VALIDATE_CERTS is set.
 
transport
required
    Choices:
  • rest
  • cli ←
Configures the transport connection to use when connecting to the remote device.
server
required
The BIG-IP host. You can omit this option if the environment variable F5_SERVER is set.
server_port
(added in 2.2)
Default:
443
The BIG-IP server port. You can omit this option if the environment variable F5_SERVER_PORT is set.
state
    Choices:
  • present ←
  • absent
  • enabled
  • disabled
The virtual address state. If absent, an attempt to delete the virtual address will be made. This will only succeed if this virtual address is not in use by a virtual server. present creates the virtual address and enables it. If enabled, enable the virtual address if it exists. If disabled, create the virtual address if needed, and set state to disabled.
user
required
The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You can omit this option if the environment variable F5_USER is set.
validate_certs
(added in 2.0)
    Choices:
  • no
  • yes ←
If no, SSL certificates will not be validated. Use this only on personally controlled sites using self-signed certificates. You can omit this option if the environment variable F5_VALIDATE_CERTS is set.

Notes

Note

Examples

- name: Create data center "New York"
  bigip_gtm_datacenter:
    server: lb.mydomain.com
    user: admin
    password: secret
    name: New York
    location: 222 West 23rd
  delegate_to: localhost

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key
Returned
Description
contact
string
changed
The contact that was set on the datacenter.

Sample:
admin@root.local
description
string
changed
The description that was set for the datacenter.

Sample:
Datacenter in NYC
disabled
bool
changed
Whether the datacenter is disabled or not.

Sample:
True
enabled
bool
changed
Whether the datacenter is enabled or not

Sample:
True
location
string
changed
The location that is set for the datacenter.

Sample:
222 West 23rd
state
string
changed
State of the datacenter.

Sample:
disabled


Status

This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.

Author

  • Tim Rupp (@caphrim007)

Hint

If you notice any issues in this documentation you can edit this document to improve it.